Even though error was fixed the interface checks still fails, if last_resort
was set to blackhole or unreachable.
To fix this issue do not remove failure interface from iptables change on
down event.
Reported-by: Colby Whitney <colby.whitney@luxul.com>
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 6d99b602fd)
If more then one interface get up/down at once mwan3 could be in a
undefined state, because more then one mwan3 hotplug script are running
and editing the iptables.
Lock the critical section should solve this issue.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit b6e9debc1b)
If netifd set an interface up/down which is not tracked by mwan3 the
connected network of that interface should regardless be added/removed to the
mwan3_connected ipset.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit f94975b71f)
On dynamic interface proto (dhcp/pppoe) the hotplug will not execude (exit 9)
because the gateway is already released. The check will now only be made
on a ifup ACTION event.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 28c8b664e4)
On some environments, connecting to localhost was resolving to ::1,
which didn't match the bind to the explicit 127.0.0.1.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Added many more UCI config options, particularly for bridge connections
The recently introduced username/password options for bridges are kept,
even though they have been deprecated upstream for a while. In keeping
with this, while support is kept in UCI, the generated mosquitto.conf
file will always generate the "modern" remote_username/remote_password
options preferred by mosquitto instead.
Likewise for bridge clientid and remote_clientid options.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Use newest acme.sh release (2.6.8).
Remove dependency on ca-certificates and add dependency on ca-bundle.
Update environment variable.
Signed-off-by: Daniel Halmschlager <da@halms.at>
Backport to 17.01 for compatibility with 17.01.2, but keep the old envvar so
it'll hopefully keep working for users who haven't upgraded.
Closes#4579, closes#4699.
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
This commit introduces nlbwmon, the lightweight NetLink BandWidth Montor.
The nlbwmon daemon gathers per-host traffic statistics by querying netlink
accounting data. Due to this approach, the executable is very small and does
not rely on libpcap and CPU intensive raw sockets to monitor traffic.
Besides raw per-host traffic counters, nlbwmon also support rudimentary
traffic classification by observing IP protocols and used port numbers.
Gathered accounting data is stored into a series of database files which
are regularily committed to persistent storage.
Refresh, commit and accounting intervals are freely configurable as well
as the layer7 protocol mapping rules and observed source subnets.
This package also bundles a cli client which can be used to dump the
gathered traffic data as JSON, CSV or plaintext data. A pull request to
add a graphical LuCI frontend for nlbwmon is pending.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The most important change is local redirects being disabled by default.
There is an option called cgi.local-redir that allows enabling this
optimization manually back if needed.
Local redirects were initially introduced in 1.4.40 but caused many
problems for *some* web services.
One of problems is breaking Post/Redirect/Get design pattern. With
redirects handled on server side there is no browser redirection making
it "lose" the POST data.
Another possible issue are HTML forms with action="". With CGI local
redirects browser may be sending form data to the wrong URL (the one
that was supposed to redirect the browser).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
According to openconnect --help output:
-m, --mtu=MTU Request MTU from server
--base-mtu=MTU Indicate path MTU to/from server
Fixes#2099 by allowing setting tunnel mtu
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
It was introduced with 41f8d5465 ("openconnect: fix a couple of minor
things and add an interface option") and not needed since 4083de9d7
("openconnect: use proto_add_host_dependency")
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* create /etc/vsftpd directory for extra config files
like userlist, certificate and key
* modify config file to use that directory
* include that directory in conffiles for backup
* use PKG_HASH
* update URL
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 3f390c5509)
Adds the "notifications" option which is important when connecting
mosquitto to rabbitmq for instance.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Earlier, PROVIDES handling was clarified for the broker and the library.
Use the same style to properly provide the -client-ssl and -client-nossl
packages.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Compile tested: LEDE HEAD
If unixodbc package is present in the environment, subversion
fails to compile due to missing dependencies.
Fixes the dependency on unixodbc if unixodbc package is selected.
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
(cherry picked from commit 06a529df35)
trigger_b4_dl fails to build in the 17.01 buildbot and that causes
also three other modules to be unbuilt (userdir, usertrack, webdav).
As a quick fix, disable trigger_b4_dl to see if the three missing
modules then build ok in the buildbot.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This reverts commit 18d7593c72.
Buildbot did not build the new version successfully due to
krb5 detection problems. Let's revert to the previous version,
so that 17.01.1 can be built in a stable way.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
cherry picked from commit 6e788aca0c
Hopefully this will fix compilation of some plugins in the 17.01 buildbot.
signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
procd interface triggers may be busy. Unbound hard restarts will
flush the cache. This might happen frequently depending on how
interface triggers occur.
Change the procd trigger to reduce occurences. Load this trigger
prior to netifd (START=20), but only truly start Unbound from
the trigger rather than immediately in init. Clean up log entries
in scripts after Unbound, NTP, and DNSSEC are established.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Unbound is configured to restart on hotplug/iface but this can result
in numerous restarts at boot. Unbound also has a restart for NTP.
This was observed to generate trouble and even with procd robustness
too many crashes might occur (rare). Unbound would not be running.
Give more care to /var/lib/unbound/root.key during restarts. Use procd
for iface restarts. Check pidof() to wait one more second for Unbound.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
options 'add_local_fqdn' and 'add_wan_fqdn' can be affected
by race conditions when they are at level 4. Interface name
may not be returned by network tools. The conf file has bad
record formats and Unbound just will not load. Detect this
and fall back to only the host FQDN (level 3).
squash: improve documentation wording and format codes.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
Read UNBOUND_TXT_DOMAIN from main unbound configuration.
This prevents records to be added into Unbound in the default 'lan' zone.
Signed-off-by: Audric Schiltknecht <storm+github@chemicalstorm.org>
[RELEASE] Released version 1.7.5 due to bug in compression
Released version 1.7.5 with the following main changes :
- BUG/MEDIUM: peers: fix buffer overflow control in intdecode.
- BUG/MEDIUM: buffers: Fix how input/output data are injected into buffers
- BUG/MEDIUM: http: Fix blocked HTTP/1.0 responses when compression is enabled
- BUG/MINOR: filters: Don't force the stream's wakeup when we wait in flt_end_analyze
- DOC: fix parenthesis and add missing "Example" tags
- DOC: update the contributing file
- DOC: log-format/tcplog/httplog update
- MINOR: config parsing: add warning when log-format/tcplog/httplog is overriden in "defaults" sections
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
[RELEASE] Released version 1.7.4
Released version 1.7.4 with the following main changes :
- MINOR: config: warn when some HTTP rules are used in a TCP proxy
- BUG/MINOR: spoe: Fix soft stop handler using a specific id for spoe filters
- BUG/MINOR: spoe: Fix parsing of arguments in spoe-message section
- BUG/MEDIUM: ssl: Clear OpenSSL error stack after trying to parse OCSP file
- BUG/MEDIUM: cli: Prevent double free in CLI ACL lookup
- BUG/MINOR: Fix "get map <map> <value>" CLI command
- BUG/MAJOR: connection: update CO_FL_CONNECTED before calling the data layer
- BUG/MEDIUM: ssl: switchctx should not return SSL_TLSEXT_ERR_ALERT_WARNING
- BUG/MINOR: checks: attempt clean shutw for SSL check
- CONTRIB: tcploop: add limits.h to fix build issue with some compilers
- CONTRIB: tcploop: make it build on FreeBSD
- CONTRIB: tcploop: fix time format to silence build warnings
- CONTRIB: tcploop: report action 'K' (kill) in usage message
- CONTRIB: tcploop: fix connect's address length
- CONTRIB: tcploop: use the trash instead of NULL for recv()
- BUG/MEDIUM: listener: do not try to rebind another process' socket
- BUG/MEDIUM: filters: Fix channels synchronization in flt_end_analyze
- BUG/MAJOR: stream-int: do not depend on connection flags to detect connection
- BUG/MEDIUM: connection: ensure to always report the end of handshakes
- BUG: payload: fix payload not retrieving arbitrary lengths
- BUG/MAJOR: http: fix typo in http_apply_redirect_rule
- MINOR: doc: 2.4. Examples should be 2.5. Examples
- BUG/MEDIUM: stream: fix client-fin/server-fin handling
- MINOR: fd: add a new flag HAP_POLL_F_RDHUP to struct poller
- BUG/MINOR: raw_sock: always perfom the last recv if RDHUP is not available
- DOC/MINOR: Fix typos in proxy protocol doc
- DOC: Protocol doc: add checksum, TLV type ranges
- DOC: Protocol doc: add SSL TLVs, rename CHECKSUM
- DOC: Protocol doc: add noop TLV
- MEDIUM: global: add a 'hard-stop-after' option to cap the soft-stop time
- BUG/MINOR: cfgparse: loop in tracked servers lists not detected by check_config_validity().
- MINOR: server: irrelevant error message with 'default-server' config file keyword.
- MINOR: doc: fix use-server example (imap vs mail)
- BUG/MEDIUM: tcp: don't require privileges to bind to device
- BUILD: make the release script use shortlog for the final changelog
- BUILD: scripts: fix typo in announce-release error message
Signed-off-by: Thomas Heil <heil@terminal-consulting.de>
