Merge pull request #26 from devilbox/release-0.18

Add Module: IonCube

Dockerfiles/mods/Dockerfile-5.3

@@ -116,6 +116,16 @@ RUN set -x \
 		${BUILD_DEPS} \
 	\
 	\
+	&& EXTENSION_DIR="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )" \
+&& if [ ! -d "${EXTENSION_DIR}" ]; then mkdir -p "${EXTENSION_DIR}"; fi \
+&& curl https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz -L -o ioncube.tar.gz \
+&& tar xvfz ioncube.tar.gz \
+&& cd ioncube \
+&& cp "ioncube_loader_lin_5.3.so" "${EXTENSION_DIR}/ioncube.so" \
+&& cd ../ \
+&& rm -rf ioncube \
+&& rm -rf ioncube.tar.gz \
+ \
 	&& echo "/usr" | pecl install amqp \
 	&& docker-php-ext-enable amqp \
 	&& pecl install apcu-4.0.11 \

Dockerfiles/mods/Dockerfile-5.4

@@ -116,6 +116,16 @@ RUN set -x \
 		${BUILD_DEPS} \
 	\
 	\
+	&& EXTENSION_DIR="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )" \
+&& if [ ! -d "${EXTENSION_DIR}" ]; then mkdir -p "${EXTENSION_DIR}"; fi \
+&& curl https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz -L -o ioncube.tar.gz \
+&& tar xvfz ioncube.tar.gz \
+&& cd ioncube \
+&& cp "ioncube_loader_lin_5.4.so" "${EXTENSION_DIR}/ioncube.so" \
+&& cd ../ \
+&& rm -rf ioncube \
+&& rm -rf ioncube.tar.gz \
+ \
 	&& echo "/usr" | pecl install amqp \
 	&& docker-php-ext-enable amqp \
 	&& pecl install apcu-4.0.11 \

Dockerfiles/mods/Dockerfile-5.5

@@ -118,6 +118,16 @@ RUN set -x \
 		${BUILD_DEPS} \
 	\
 	\
+	&& EXTENSION_DIR="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )" \
+&& if [ ! -d "${EXTENSION_DIR}" ]; then mkdir -p "${EXTENSION_DIR}"; fi \
+&& curl https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz -L -o ioncube.tar.gz \
+&& tar xvfz ioncube.tar.gz \
+&& cd ioncube \
+&& cp "ioncube_loader_lin_5.5.so" "${EXTENSION_DIR}/ioncube.so" \
+&& cd ../ \
+&& rm -rf ioncube \
+&& rm -rf ioncube.tar.gz \
+ \
 	&& echo "/usr" | pecl install amqp \
 	&& docker-php-ext-enable amqp \
 	&& pecl install apcu-4.0.11 \

Dockerfiles/mods/Dockerfile-5.6

@@ -120,6 +120,16 @@ RUN set -x \
 		${BUILD_DEPS} \
 	\
 	\
+	&& EXTENSION_DIR="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )" \
+&& if [ ! -d "${EXTENSION_DIR}" ]; then mkdir -p "${EXTENSION_DIR}"; fi \
+&& curl https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz -L -o ioncube.tar.gz \
+&& tar xvfz ioncube.tar.gz \
+&& cd ioncube \
+&& cp "ioncube_loader_lin_5.6.so" "${EXTENSION_DIR}/ioncube.so" \
+&& cd ../ \
+&& rm -rf ioncube \
+&& rm -rf ioncube.tar.gz \
+ \
 	&& echo "/usr" | pecl install amqp \
 	&& docker-php-ext-enable amqp \
 	&& pecl install apcu-4.0.11 \

Dockerfiles/mods/Dockerfile-7.0

@@ -118,6 +118,16 @@ RUN set -x \
 		${BUILD_DEPS} \
 	\
 	\
+	&& EXTENSION_DIR="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )" \
+&& if [ ! -d "${EXTENSION_DIR}" ]; then mkdir -p "${EXTENSION_DIR}"; fi \
+&& curl https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz -L -o ioncube.tar.gz \
+&& tar xvfz ioncube.tar.gz \
+&& cd ioncube \
+&& cp "ioncube_loader_lin_7.0.so" "${EXTENSION_DIR}/ioncube.so" \
+&& cd ../ \
+&& rm -rf ioncube \
+&& rm -rf ioncube.tar.gz \
+ \
 	&& echo "/usr" | pecl install amqp \
 	&& docker-php-ext-enable amqp \
 	&& pecl install apcu \

Dockerfiles/mods/Dockerfile-7.1

@@ -118,6 +118,16 @@ RUN set -x \
 		${BUILD_DEPS} \
 	\
 	\
+	&& EXTENSION_DIR="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )" \
+&& if [ ! -d "${EXTENSION_DIR}" ]; then mkdir -p "${EXTENSION_DIR}"; fi \
+&& curl https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz -L -o ioncube.tar.gz \
+&& tar xvfz ioncube.tar.gz \
+&& cd ioncube \
+&& cp "ioncube_loader_lin_7.1.so" "${EXTENSION_DIR}/ioncube.so" \
+&& cd ../ \
+&& rm -rf ioncube \
+&& rm -rf ioncube.tar.gz \
+ \
 	&& echo "/usr" | pecl install amqp \
 	&& docker-php-ext-enable amqp \
 	&& pecl install apcu \

Dockerfiles/mods/Dockerfile-7.2

@@ -119,6 +119,16 @@ RUN set -x \
 		${BUILD_DEPS} \
 	\
 	\
+	&& EXTENSION_DIR="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )" \
+&& if [ ! -d "${EXTENSION_DIR}" ]; then mkdir -p "${EXTENSION_DIR}"; fi \
+&& curl https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz -L -o ioncube.tar.gz \
+&& tar xvfz ioncube.tar.gz \
+&& cd ioncube \
+&& cp "ioncube_loader_lin_7.2.so" "${EXTENSION_DIR}/ioncube.so" \
+&& cd ../ \
+&& rm -rf ioncube \
+&& rm -rf ioncube.tar.gz \
+ \
 	&& pecl install amqp \
 	&& docker-php-ext-enable amqp \
 	&& pecl install apcu \

Dockerfiles/prod/data/docker-entrypoint.d/38-enable-modules.sh

@@ -0,0 +1,51 @@
+#!/usr/bin/env bash
+
+set -e
+set -u
+set -o pipefail
+
+
+############################################################
+# Functions
+############################################################
+
+###
+### Enable PHP Modules
+###
+enable_modules() {
+	local mod_varname="${1}"
+	local debug="${2}"
+	local cfg_path="/usr/local/etc/php/conf.d"
+	local mod_path=
+	mod_path="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )"
+
+
+	if ! env_set "${mod_varname}"; then
+		log "info" "\$${mod_varname} not set. Not enabling any PHP modules." "${debug}"
+	else
+		mods="$( env_get "${mod_varname}" )"
+
+		if [ -z "${mods}" ]; then
+			log "info" "\$${mod_varname} set, but empty. Not enabling any PHP modules." "${debug}"
+		else
+			log "info" "Enabling the following PHP modules: ${mods}" "${debug}"
+		fi
+
+		while read -r mod; do
+			mod="$( echo "${mod}" | xargs )" # trim
+
+			# Does the module exist?
+			if [ -f "${mod_path}/${mod}.so" ]; then
+				# Exceptions to load speficially
+				if [ "${mod}" = "ioncube" ]; then
+					run "eche 'zend_extension=${mod_path}/ioncube.so' > '${cfg_path}/docker-ext-php-ext-ioncube.ini'" "${debug}"
+				# Generic Load
+				else
+					run "docker-php-ext-enable ${mod} || true" "${debug}"
+				fi
+			else
+				log "warn" "Enabling PHP Module: '${mod}' does not exist" "${debug}"
+			fi
+		done <<< "$( echo "${mods}" | tr ',' '\n' )"
+	fi
+}

Dockerfiles/prod/data/docker-entrypoint.d/39-disable-modules.sh

@@ -15,7 +15,7 @@ set -o pipefail
 disable_modules() {
 	local mod_varname="${1}"
 	local debug="${2}"
-	local mod_path="/usr/local/etc/php/conf.d"
+	local cfg_path="/usr/local/etc/php/conf.d"
 
 	if ! env_set "${mod_varname}"; then
 		log "info" "\$${mod_varname} not set. Not disabling any PHP modules." "${debug}"
@@ -23,17 +23,16 @@ disable_modules() {
 		mods="$( env_get "${mod_varname}" )"
 
 		if [ -z "${mods}" ]; then
-			log "warn" "\$${mod_varname} set, but empty. Not disabling any PHP modules." "${debug}"
+			log "info" "\$${mod_varname} set, but empty. Not disabling any PHP modules." "${debug}"
 		else
 			log "info" "Disabling the following PHP modules: ${mods}" "${debug}"
 		fi
 
 		while read -r mod; do
-		#for mod in ${mods//,/ }; do
 			mod="$( echo "${mod}" | xargs )" # trim
 
 			# Find all config files that enable that module
-			files="$( grep -Er "^(zend_)?extension.*(=|/)${mod}\.so" "${mod_path}" || true )"
+			files="$( grep -Er "^(zend_)?extension.*(=|/)${mod}\.so" "${cfg_path}" || true )"
 
 			if [ -n "${files}" ]; then
 				while read -r f; do
@@ -44,6 +43,5 @@ disable_modules() {
 				done <<< "${files}"
 			fi
 		done <<< "$( echo "${mods}" | tr ',' '\n' )"
-		#done
 	fi
 }

Dockerfiles/prod/data/docker-entrypoint.sh

@@ -160,6 +160,12 @@ copy_ini_files "${PHP_CUST_INI_DIR}" "${PHP_INI_DIR}" "${DEBUG_LEVEL}"
 copy_fpm_files "${PHP_CUST_FPM_DIR}" "${PHP_FPM_DIR}" "${DEBUG_LEVEL}"
 
 
+###
+### Enable PHP Modules
+###
+enable_modules "ENABLE_MODULES" "${DEBUG_LEVEL}"
+
+
 ###
 ### Disable PHP Modules
 ###

Dockerfiles/work/data/docker-entrypoint.sh

@@ -160,6 +160,12 @@ copy_ini_files "${PHP_CUST_INI_DIR}" "${PHP_INI_DIR}" "${DEBUG_LEVEL}"
 copy_fpm_files "${PHP_CUST_FPM_DIR}" "${PHP_FPM_DIR}" "${DEBUG_LEVEL}"
 
 
+###
+### Enable PHP Modules
+###
+enable_modules "ENABLE_MODULES" "${DEBUG_LEVEL}"
+
+
 ###
 ### Disable PHP Modules
 ###

README.md

@@ -610,7 +610,7 @@ Have a look at the following table to see all supported environment variables fo
    <td colspan="5"></td>
   </tr>
   <tr>
-   <td rowspan="5"><strong>prod</strong><br/><br/><strong>work</strong></td>
+   <td rowspan="6"><strong>prod</strong><br/><br/><strong>work</strong></td>
    <td><code>TIMEZONE</code></td>
    <td>string</td>
    <td><code>UTC</code></td>
@@ -622,6 +622,12 @@ Have a look at the following table to see all supported environment variables fo
    <td><code>1</code></td>
    <td>By default all Docker images are configured to output their PHP-FPM access and error logs to stdout and stderr. Those which support it can change the behaviour to log into files inside the container. Their respective directories are available as volumes that can be mounted to the host computer. This feature might help developer who are more comfortable with tailing or searching through actual files instead of using docker logs.<br/><br/>Set this variable to <code>0</code> in order to enable logging to files. Log files are avilable under <code>/var/log/php/</code> which is also a docker volume that can be mounted locally.</td>
   </tr>
+  <tr>
+   <td><code>ENABLE_MODULES</code></td>
+   <td>string</td>
+   <td><code>''</code></td>
+   <td>Comma separated list of PHP modules to enable, which are not enabled by default.<br/><strong>Example:</strong><br/><code>ENABLE_MODULES=ioncube</code></td>
+  </tr>
   <tr>
    <td><code>DISABLE_MODULES</code></td>
    <td>string</td>

build/ansible/DOCKERFILES/Dockerfile-mods.j2

@@ -113,6 +113,9 @@ RUN set -x \
 {% endif %}
 	&& docker-php-ext-enable {{ ext }} \
 	&& cd / && rm -rf /tmp/{{ ext }} \
+{# ---- 4.) CUSTOM ---- #}
+{% elif extensions_available[ext][php_version]['type'] == 'custom' %}
+	&& {{ extensions_available[ext][php_version]['command'] }} \
 {% endif %}
 {# ---------- Installation (generic) ---------- #}
 {% elif 'all' in extensions_available[ext] and 'type' in extensions_available[ext]['all'] %}
@@ -147,6 +150,9 @@ RUN set -x \
 {% endif %}
 	&& docker-php-ext-enable {{ ext }} \
 	&& cd / && rm -rf /tmp/{{ ext }} \
+{# ---- 4.) CUSTOM ---- #}
+{% elif extensions_available[ext]['all']['type'] == 'custom' %}
+	&& {{ extensions_available[ext]['all']['command'] }} \
 {% endif %}
 {% endif %}
 {% endif %}
@@ -181,6 +187,8 @@ RUN set -x \
 {% if ext == 'opcache' %}
 	&& php -m | grep -oiE '^Zend Opcache$' \
 	&& php-fpm -m | grep -oiE '^Zend Opcache$' \
+{% elif ext == 'ioncube' %}
+{# Not enabled #}
 {% else %}
 	&& php -m | grep -oiE '^{{ ext }}$' \
 	&& php-fpm -m | grep -oiE '^{{ ext }}$' \

build/ansible/group_vars/all.yml

@@ -398,6 +398,8 @@ software_available:
 ### Extensions to actually enable
 ###
 extensions_enabled:
+  # ioncube must be loaded first
+  - ioncube
   - amqp
   - apcu
   - bcmath
@@ -505,6 +507,8 @@ extensions_enabled:
 #   git_ref:   [optional] Tag, branch, commit to checkout
 #   configure: [optional] Add './configure' arguments
 #   command:   [optional] Overwrite default command (phpize && ./configure && make && make install)
+# type: custom
+#   command:   [required] Custom command to install and enable a module
 extensions_available:
   amqp:
     disabled: [7.3]
@@ -663,6 +667,20 @@ extensions_available:
       type: builtin
       build_dep: [libicu-dev]
       run_dep: [libicu52]
+  ioncube:
+    disabled: [7.3]
+    all:
+      type: custom
+      command: |
+        EXTENSION_DIR="$( php -i | grep ^extension_dir | awk -F '=>' '{print $2}' | xargs )" \
+        && if [ ! -d "${EXTENSION_DIR}" ]; then mkdir -p "${EXTENSION_DIR}"; fi \
+        && curl https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz -L -o ioncube.tar.gz \
+        && tar xvfz ioncube.tar.gz \
+        && cd ioncube \
+        && cp "ioncube_loader_lin_{{ php_version }}.so" "${EXTENSION_DIR}/ioncube.so" \
+        && cd ../ \
+        && rm -rf ioncube \
+        && rm -rf ioncube.tar.gz \
   json:
     7.0:
       type: builtin